![]() ![]() |
Jun 13 2005, 10:59 AM
Post
#1
|
|
![]() regular ![]() ![]() Group: Regular Posts: 1,493 Joined: 23-November 03 From: Brunswick, OH Member No.: 11,581 |
This is a brand new product. Note that it requires a video card that can resolve its wide, hi-res format. You need to verify that before use or you most likely will be ordering a new card whilst the display sits in the box.
-------------------- Bob Kulon
Oh, one more thing... Play it Straight and Play it True, my Brother. |
|
|
|
Jun 15 2005, 02:15 PM
Post
#2
|
|
|
regular ![]() ![]() Group: Regular Posts: 637 Joined: 31-August 02 Member No.: 2,413 |
Dou you know whats the dot pitch? Its nowhere in the specs.
-------------------- |
|
|
|
Jun 20 2005, 12:48 PM
Post
#3
|
|
|
members ![]() Group: Regular Posts: 133 Joined: 4-September 02 Member No.: 14,621 |
What's the difference between Pixel pitch & dot size, or is this Specification even related?. My Sony CRT has a dot size of .22
I guess I need to do a little home work. -------------------- Bill Koenig,
|
|
|
|
Jun 20 2005, 03:17 PM
Post
#4
|
|
![]() regular ![]() ![]() Group: Regular Posts: 1,493 Joined: 23-November 03 From: Brunswick, OH Member No.: 11,581 |
QUOTE (Bill Koenig @ June 20 2005,08:48) What's the difference between Pixel pitch & dot size, or is this Specification even related?. My Sony CRT has a dot size of .22 I guess I need to do a little home work. Pixel pitch is the reciprical of dot size... 1/.22mm = 4.545 pixels/mm 4.545 pixels/mm x 25.4 mm/inch = 115.45 pixels/inch That's better than most! -------------------- Bob Kulon
Oh, one more thing... Play it Straight and Play it True, my Brother. |
|
|
|
Jun 13 2005, 09:57 AM
Post
#5
|
|
|
regular ![]() ![]() Group: Regular Posts: 637 Joined: 31-August 02 Member No.: 2,413 |
Any experience with the Dell UltraSharp 2405FPW 24" LCD Monitor?
How does it compare to the 213T or the Cinema displays? Sergio -------------------- |
|
|
|
Jun 15 2005, 08:33 AM
Post
#6
|
|
|
members ![]() Group: Members Posts: 6 Joined: 25-April 05 From: Tucson AZ Member No.: 5,498 |
I'm using this monitor docked to a Dell 9300. This by far the best monitor I've ever used. It also has 4 USB slots as well as a slot for my CF card. Getting ready to go out and shoot slot canyons in No Az otherwise would write more. Bottom line, if your computer can handle it get it. I got both at the same time that way I knew the monitor would work with the 9300.
|
|
|
|
Jun 16 2005, 05:55 PM
Post
#7
|
|
|
members ![]() Group: Members Posts: 6 Joined: 25-April 05 From: Tucson AZ Member No.: 5,498 |
The following info is a poor job of cut/paste directly from the CD.
Monitor Specifications General Model number 2405FPW Flat Panel Screen type Active matrix - TFT LCD Screen dimensions 24 inches (24-inch diagonal viewable image size) Preset display area: Horizontal 518.4 mm (20.4 inches) Vertical 324.0 mm (12.7 inches) Pixel pitch 0.270 mm Viewing angle +/- 89° (vertical) typ, +/- 89° (horizontal) typ Luminance output 500 cd/m ²(typ) Contrast ratio 1000:1 (typ) Faceplate coating Antiglare with hard-coating 3H Backlight 6 CCFLs U-type backlight Response Time 12ms typical (Grey to Grey) / 16ms typical (Black to White) Resolution Horizontal scan range 30 kHz to 81 kHz (automatic) Vertical scan range 56 Hz to 76 Hz, exception 1680 x 1200 & 1920 x 1200 at 60 Hz only Optimal preset resolution Analog : 1920 x 1200 at 60 Hz(VESA CVT-R Mode) Digital : 1920 x 1200 at 60 Hz(VESA CVT-R Mode) Highest preset resolution Analog : 1920 x 1200 at 60 Hz(VESA CVT-R Mode) Digital : 1920 x 1200 at 60 Hz(VESA CVT-R Mode) Dell™ guarantees image size and centering for all preset modes listed in the following table. Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VGA, 720 x 400 31.5 70.1 28.3 -/+ VGA, 640 x 480 31.5 59.9 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 1200 75.0 60.0 162.0 +/+ VESA, 1920 x 1200 74.0 60.0 154.0 +/- Electrical Video input signals Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance Digital DVI-D TMDS: 600mV for each differential line, 50 ohm input impedance S-video: Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input impedance Composite: 1 volt(p-p), 75 ohm input impedance, Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input impedance Synchronization input signals separate horizontal and vertical, 3.3V Cmos or 5V TTL level, positive or negative sync. SOG (Sync on green) AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.) Inrush current 120V: 40A (Max.) 240V: 80A (Max.) Physical Characteristics Signal cable type D-sub: Detachable, Analog, 15pin, shipped attached to the monitor DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor S-video: Not included with display Composite: Not included with display Component: Not included with display Dimensions (with stand): Height (fully extended in portrait mode) 642.7 mm (25.3 inches) Height (compressed/locked in landscape mode) 546.8 mm (21.5 inches) Width 559.4 mm (22.0 inches) Depth 229.0 mm (9.0 inches) Weight Monitor (Stand and Head) 10.0 kg (22.1 lb) Monitor Flat panel only (VESA Mode) 7.0 kg (15.4 lb) Weight with packaging 13.2 kg (29.1 lb) Environmental Temperature: Operating 5° to 35°C (41° to 95°F) Nonoperating Storage: 0° to 60°C (32° to 140°F) Shipping: -20° to 60°C(-4° to 140°F) Humidity: Operating 10% to 80% (noncondensing) Nonoperating Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) Altitude: Operating 3,657.6 m (12,000 ft) max Nonoperating 12,192 m (40,000 ft) max Thermal dissipation 272.8 BTU/hour (maximum) 201.2 BTU/hour (typical) |
|
|
|
Jun 20 2005, 01:53 PM
Post
#8
|
|
|
regular ![]() ![]() Group: Regular Posts: 1,592 Joined: 17-February 05 From: Oslo, Norway Member No.: 8,127 |
QUOTE (Bill Koenig @ June 20 2005,13:48) What's the difference between Pixel pitch & dot size, or is this Specification even related?. My Sony CRT has a dot size of .22 I guess I need to do a little home work. In brief: Pixel pitch is the commonly used term for the physical size of an RGB picture element (therefore "pixel") in an LCD monitor. Dot pitch is the commonly used term for the physical size of an RGB picture element in a CRT monitor. Also, the technologies behind are so different that you cannot equate the measurements. An LCD monitor's pixel is, for all intents and purposes, square. A CRT monitor's pixel may or may not be square, depending on the design goals. From a user's point of view, these do not appear to be fundamentally different, with one exception: LCD panels are inherently worse at simulating other resolutions than their "native" resolution. That is, if your LCD panel is a 1024x76 8 panel, it performs poorly at 800x600, and it cannot emulate 1280x960. A CRT monitor can easily give you lower resolutions than its maximum (similar to the LCD "native"), and often cheat to give the impression of a higher resolution than the dot pitch implies. Here are some web sources for that home work. http://computer.howstuffworks.com/monitor.htm http://computer.howstuffworks.com/question401.htm http://electronics.howstuffworks.com/lcd.htm http://en.wikipedia.org/wiki/Dot_pitch http://en.wikipedia.org/wiki/Pixel http://en.wikipedia.org/wiki/Liquid_crystal_display http://en.wikipedia.org/wiki/Cathode_Ray_Tube -------------------- Jan
|
|
|
|
![]() ![]() |
| Lo-Fi Version | Time is now: 21st November 2009 - 03:26 PM |